How to Install Vinyl Flooring in Your Home

5

If you’re planning on installing vinyl flooring in your home, there are a few things you should know. For starters, you will need to prepare the area where you will install the floor. Next, you’ll need to cut the planks, apply the adhesive, and seal the seams. After you’ve done that, it’s time to staple down the new underlayment.

Cut the planks

If you want to install vinyl flooring in your home, you must cut the planks to size. Cutting the planks to fit your room is relatively easy as long as you have the right tools.

To start, you should measure the area where you want to install your new flooring. Then, lay out the planks in the space. This will help you to see how your boards will fit together and the color and pattern changes that occur during the manufacturing process.

You can use various tools to cut the planks to the correct size. One tool you may consider is a jigsaw. These saws can be used to cut straight through the entire plank.

Another option is a rip saw. This type of saw is designed for cutting rough wood and will not damage the vinyl planks.

Smooth the underlayer

Underlayment is a thin layer between the subfloor and the finished floor. It provides insulation and cushion, but it also absorbs sound. Depending on your needs, you may need a hard or soft underlayment.

The good news is that there are numerous options. This includes foam, oriented strand board, and plywood. Each product has advantages and disadvantages, so it’s best to read the manufacturer’s directions carefully.

Plywood is excellent for a solid subfloor and can handle some weight. However, it tends to develop depression when pressed against one spot.

On the other hand, particle board is a low-cost, flat alternative. It’s not as strong as plywood but bonds well with vinyl adhesives.

Apply the adhesive

If you are planning to install vinyl flooring, you must apply the adhesive properly. Different sealants are recommended for other projects. For instance, some are only appropriate for indoor installations. Some bonds require knowledge and experience to use.

When buying an adhesive, look for a moisture-resistant and alkali-resistant product. Also, check whether the company offers a warranty.

When installing vinyl planks, you should start by laying a piece of craft paper on the floor. This will help you transfer the pattern onto the vinyl sheet. You will need to leave a gap at the edges of the sheet. Then, cut the vinyl sheet to the correct size and shape.

To ensure that you apply the adhesive properly, you must prepare the subfloor. First, make sure it is clean and level. Additionally, it would be best if you smoothed out any bumps in the subfloor. Having a flat surface will prevent the vinyl planks from slipping.

Mark and staple down the new underlayment

Underlayment is a layer of material that acts as a barrier between the subfloor and the finished floor. It can provide added cushion and moisture protection. It also helps add elevation to the floor.

The underlayment’s thickness depends on the type of flooring and the subfloor. If you are installing vinyl, you will need a minimum of 2mm. However, if you are installing an LVP, you will need a softer underlayment. Choosing the correct underlayment is very important.

A paper template can help you mark the underlayment. It would be best if you also took measurements of the room. Make sure the pattern is symmetrical. This is important because the vinyl can be applied diagonally across the room.

You will need an underlayment stapler. These can be purchased from a home improvement store. For larger areas, it is recommended to use a pneumatic stapler.

Clean and seal seams

Sealing your vinyl flooring seams will protect your floor. It also makes the floor look more attractive. However, you need to know a few essential tips before you start.

First, clean the seam. This is an easy step. You can use a vacuum cleaner or a soft cloth to remove dust and dirt. If you don’t have a vacuum, you can soak a soft cloth in a solution and wipe it over the area.

After cleaning, apply a vinyl adhesive to the seam. The glue will fix damaged or loose floor seams. You can buy vinyl adhesive at your home improvement center.

Next, you should fill the gap between the planks and with caulk. A clear silicone caulk will provide a waterproof seal. Caulk can be stained to match the color of the vinyl flooring.